Introduction
We built this Bluetooth electric heater to be a seriously tough little workhorse. Think of it as a compact halogen lamp, but one that’s designed to handle the heat of industrial jobs. It’s for the engineers out there who just need a heat source they can trust. One that lets you keep an eye on things and make adjustments without the hassle of tearing apart your whole control panel.
The Specs, Straight Up
Here’s the thing: this heater was built for demanding, point-of-use heating. It’s rated at 400V, so it can handle the higher power demands of those three-phase and high-voltage industrial circuits. And with 2500W of power, it gets hot fast. We mean, really fast. Despite all that punch, it’s small. Just 300mm long and 10mm in diameter. It slips into those tight spots without giving up a single bit of output.
What It’s Made Of
Inside, we use a halogen element inside a quartz envelope. This combo keeps the output steady and handles the sudden shock of heat changes without breaking a sweat. A special coating protects the element, too, so it keeps running clean even in dusty, gritty environments. The R7s connector is a no-brainer. It’s a proven, quick-connect setup. You wire it once, and from then on, swapping out a lamp is a snap. No more messing around with terminal blocks. And the Bluetooth? It’s there to give you status updates and let you tweak the duty-cycle. It’s not a replacement for your hard-wired safety systems, though. That’s non-negotiable.
Where It Shines
This thing is a perfect drop-in replacement for any machine that needs focused, radiant heat. We’re talking plastics heating, localized pre-heating for processes—you get the idea. That high heat density means your warm-up times shrink. But, and this is important, your machine’s cooling and ventilation need to be up to the task of handling the extra ambient heat. So, if you need a heater that installs quickly, runs hard, and gives you remote visibility, this is the practical, field-proven way to get the job done.